ZVOX SoundBase 670 Single Cabinet Sound System - Photos

01
of 06

ZVOX SoundBase 670 Single Cabinet Sound System - Photo Profile

ZVOX SoundBase 670 Single Cabinet Surround Sound System - Front, Rear, and Bottom Views
ZVOX SoundBase 670 Single Cabinet Surround Sound System - Photo of the Front, Rear, and Bottom Views. Photo © Robert Silva - Licensed to About.com

The ZVOX SoundBase 670 is a single-cabinet audio system that is designed to enhance your TV viewing experience with enhanced sound quality, as well as provided a place to set your TV on top of.

To start this photo look at ZVOX SoundBase 670 is a three-way multi-view of the unit.

ZVOX SoundBase 670 provides functions similar from what you would expect from a sound bar but encased in a low profile cabinet featuring sturdy cabinet, which can serve as a platform to place a TV.

Starting on top is a front view of the SoundBase 670. Since the speaker grill is permanently attached, I can't show the actual drivers, but the complement consists of five 2x3-inch full range drivers arranged across the front (one on each end and three in the center).

Also visible on the front panel is the LED status display and, located just below the status display, or the onboard controls ( a close-up view later shown later in this profile).

Moving down to the second photo is the rear view of the SoundBase 670 that reveals and oval port on one side for an additional low-frequency extension, the master power switch and AC receptacle on the other end, and the connection panel located slightly off center, which includes all the audio input connections.

Finally, the last photo is a look at the bottom of the SoundBase 670, which shows both the four support feet, as well as the three 5.25-inch downfiring subwoofers.

For more detailed information on the speaker and amplifier specifications of the ZVOX SoundBase 670, refer to my full review, which is linked to at the end of this photo profile.

For a closer look at the accessories, controls, and connections provided for the ZVOX SoundBase 670, proceed through the next series of photos...

02
of 06

ZVOX SoundBase 670 Single Cabinet Surround Sound System - Onboard Controls

ZVOX SoundBase 670 Single Cabinet Surround Sound System - Onboard Controls
ZVOX SoundBase 670 Single Cabinet Surround Sound System - Photo of Onboard Controls. Photo © Robert Silva - Licensed to About.com

Here is a look at the LED Status Display and onboard Controls of the ZVOX SoundBase 670.

The LED Status display set behind the front speaker grill and display in an amber color. As you go from function to function the proper items will display (volume level/mute (shown in the photo), input selection (In1d, In2d, In3d, In4A, In5Am In6A, bLUE), Bass (Lo), Treble (Hi), Surround Settings (Sd 1, Sd 2, Sd 3), Output Level (OL), and Accuvoice (ACCU).

Most of the control functions are accessed via the provided wireless remote, but the onboard controls that are provided, as shown in the photo, are Mute, Volume, and Input Selection. Also included is a front panel 3.5mm stereo audio input for connecting compatible portable audio playback devices.

03
of 06

ZVOX SoundBase 670 Single Cabinet Surround Sound System - Audio Connections

ZVOX SoundBase 670 Single Cabinet Surround Sound System - Audio Connections
ZVOX SoundBase 670 Single Cabinet Surround Sound System - Photo of rear panel audio connections. Photo © Robert Silva - Licensed to About.com

Shown in this photo is a close-up of audio input connections provided on the ZVOX SoundBase 670.

Starting on the left is one Digital Coaxial (3) and Two Digital Optical (2 and 1) audio inputs.

Moving to the center of this photo are two sets of Analog (RCA Stereo inputs (4 and 5).

Continuing to the right are a Subwoofer line output (optional) and Stereo signal output (3.5mm connection). The stereo signal output can be used to connect the ZVOX to an external audio system or, even more practical, to a wireless headphone transmitter for convenient private listening. With either option, the volume controls of the 670 are used.

There is also an additional analog stereo connection (3.5mm) mounted on the front panel (not shown in this photo).

Also, in addition to the physical connections shown, the SoundBase 670 also incorporates Bluetooth capability, which allows wireless streaming of audio content from compatible portable devices, such as smartphones and tablets.

04
of 06

ZVOX SoundBase 670 Single Cabinet Surround Sound System - Remote Control

ZVOX SoundBase 670 Single Cabinet Surround Sound System - Remote Control
ZVOX SoundBase 670 Single Cabinet Surround Sound System - Photo of Remote Control. Photo © Robert Silva - Licensed to About.com

Here is a photo of the wireless remote control provided with the ZVOX SoundBase 670.

On the top of the remote are the Input Select and Power On buttons.

Moving down to the next section are Accuvoice (ACCU), Output Leveling (OL), Surround Select, and Bass/Treble controls.

Moving to the bottom section are the Mule, and Volume controls.

The remote is compact and clearly, which makes it easy to hold and read in bright on dimly lit rooms. However, it is not backlit so using it in a darkened room may be difficult for some.

05
of 06

ZVOX SoundBase 670 - Included Accessories and Documentation

ZVOX SoundBase 670 Single Cabinet Surround Sound System - Included Accessories and Documentation
ZVOX SoundBase 670 Single Cabinet Surround Sound System Photo of Included Accessories and Documentation. Photo © Robert Silva - Licensed to About.com

Shown on this page are the additional accessories and documentation provided with the ZVOX SoundBase 670.

First up, in the center of the photos are the accessories provided with the SoundBase 670. First is the Remote Control (shown up close in the previous photo).​

Just to the left of the remote is a set of analog audio connections that provide RCA-style connectors on one end and a 3.5mm stereo connector on the other end.

Next, just to the right of the remote control is a set of analog audio connections with RCA connectors on both ends.

Placed just below the remote control is a Digital Optical cable, and finally on right is the provided detachable power cord.

Also, in addition to remote control and cables, ZVOX also provides a LOT of documentation - and it is all very useful (and most are provided in both English and French).

Starting on the left is the basic Setup and Operation Guide, and just below that is a color-illustrated Quick Setup Guide.

Moving to the center is Bluetooth setup and use guide and warranty documentation.

Finally, on the right side are SoundBase Adjustment Options instructions, and finally, on the bottom, are instructions on how to set up your Cable/Satellite remote control to work with the ZVOX SoundBase 670.

ZVOX provides all of the cables and instructions you need to get you started. The only extras you might need to purchase are longer versions of the provided cables if required in your setup, and/or a digital coaxial audio cable should you need that connection option as well.

06
of 06

ZVOX SoundBase 670 Single Cabinet Surround Sound System With TV On Top

ZVOX SoundBase 670 Single Cabinet Surround Sound System With TV On Top
ZVOX SoundBase 670 Single Cabinet Surround Sound System - Photo of Front View with TV on Top. Image provided by ZVOX Audio

Here is a final photo look at the ZVOX SoundBase 670, which shows how it can be used as a platform to set your TV on (photo provided by ZVOX).

The SoundBase 670 can be used with LCD, Plasma, or OLED TVs - as long as the TV weighs 120 pounds or less, and the TV's own stand is not larger than the SoundBase 670 platform dimensions (WDH - 36 x 16.5 x 3 1/2-inches).

This ends my photo look at the ZVOX SoundBase 670, however, I have additional explanation and perspective of the features and performance of this product in my Full Review.

Official Product Page - Buy From Amazon