Software & Apps Windows How to Remove Write Protection on Windows 10, 8, and 7 What to do when you can't make changes to files on USB drives and SD cards Share Pin Email Print Windows The Ultimate Laptop Buying Guide By Coletta Teske Writer Coletta Teske is a Lifewire writer focusing on consumer electronics. She has 30 years' experience writing for Adobe, Boeing, Microsoft, and many others. our editorial process Twitter LinkedIn Coletta Teske Updated November 11, 2019 Are you unable to make changes to files on your USB drives and SD cards? Do you get a message saying the media is write-protected? When you have a write-protected flash drive, learn how to remove write protection. Instructions in this article apply to Windows 10, Windows 8, and Windows 7. Why the Disk is Write Protected When a USB drive or SD card is write-protected, files on the media cannot be changed and can only be viewed. On write-protected media, you’re able to read and copy files, but unable to write to and delete files. Your USB drive and SD cards may become write protected because of a virus. or because the lock switch on the media has been enabled. How to Remove Write Protection Using Lock Switch If your computer tells you the media is write-protected, look for a write protection switch (also called a lock switch) on the USB or SD card. If the media has this switch, make sure the switch is set to write, not read-only. How to Remove Write Protection From a Single File When you have a single file you want to make changes to but can’t, the file may be write-protected. When a file is write-protected, it's marked as read-only. Insert the USB drive or SD card into the appropriate port on your computer. Open Windows File Explorer. Navigate to the device and folder containing the file. Select the file. Select the Home tab, then select Properties > Properties. In the Properties dialog box, select Read-only to remove the check mark. Select OK. Use Diskpart to Remove Write Protection From USB Drives There are many ways to remove write protection from USB drives in Windows. One popular method is to change a Registry key, but this is scary to some people. A less intimidating method is to use diskpart. Insert the USB drive into a USB port on your computer. Press Windows key+X. Select Run. Enter diskpart and then select OK. The User Account Control dialog box may appear and ask if you want to allow this app to make changes to your device. Select Yes to continue. Next to DISKPART>, enter list disk and press Enter. In the list of mounted disks, find your USB drive and note the disk number. Look at the size column to locate the write protected flash drive. In this example, the computer hard drive is 29 GB and the USB drive is 977 MB. Enter the command select disk disk_number and then press Enter. If, for example, your drive number is 1, enter select disk 1. When the disk is selected, diskpart displays a message saying the disk is now the selected disk. Enter the command attributes disk clear readonly and then press Enter. When write protection has been removed from the disk, diskpart displays a message stating the attributes were cleared successfully and the disk is no longer write protected. To close the diskpart window when you’re finished, type exit and press Enter. Remove Write Protection From USB Drives with regedit in Windows 10 and Windows 8 If you’d rather use the Windows Registry to remove write protection from a USB drive or SD card, use regedit to make the change. Before making any changes, back up the Windows Registry. If you make a mistake and have problems with your computer, you'll be able to restore the Registry and return your system to its original state. Insert the USB drive into a USB port on your computer. Press the Windows key+X. Select Run. Enter regedit and select OK. In the Registry Editor, navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > StorageDevicePolicies. If you can’t find the StorageDevicePolicies folder, you’ll need to create a StorageDevicesPolicies key and a WriteProtect DWORD Value. Keep reading to learn how. Double-click WriteProtect to open the Edit DWORD dialog box. In the Value data text box, replace the number with a 0 (zero). Select OK. Close regedit. Restart your computer. Create StorageDevicesPolicies Key and WriteProtect DWORD Value Navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control. In the File pane on the right, right-click empty space, point to New, then select Key. In the Folders pane on the left, name the key StorageDevicePolicies and press Enter. In the Folders pane, select StorageDevicePolicies. In the File pane, right-click empty space, point to New, then select DWORD (32-bit) Value. Name the value WriteProtect and press Enter. Double-click WriteProtect to open the Edit DWORD dialog box and remove write protection using the steps above. Edit the Registry in Windows 7 to Remove Write Protection If you use Windows 7, the process to edit the Windows Registry to remove write protection is a little different. Press Windows key+R. In the Run dialog box, enter regedit and press Enter. Navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services. Select USBSTOR. Double-click Start. In the dialog box, enter 3. Close the Registry Editor.