Home Theater & Entertainment Audio 55 55 people found this article helpful How to Use Multichannel Analog Audio Connections in Home Theater There is still room for analog audio connectivity in the digital age by Robert Silva Writer Robert Silva has written about audio, video, and home theater topics since 1998. Robert has written for Dishinfo.com, and made appearances on the YouTube series Home Theater Geeks. our editorial process Facebook Twitter LinkedIn Robert Silva Updated on November 20, 2019 Audio Speakers Stereos & Receivers Tweet Share Email The emphasis in home theater is with digital connectivity, such as HDMI, digital optical, digital coaxial, and USB. However, there is a long tradition of analog audio connectivity from the days of high fidelity and stereo. Some components that still provide analog audio-only or digital and analog audio connectivity include: CD playersAudio-Tape decksVCRsOlder DVD and Blu-ray disc players. As a result, many home theater receivers still provide some analog audio connection options — most commonly, analog stereo inputs/outputs, subwoofer, and Zone 2 preamp outputs. Multichannel analog inputs and outputs are sometimes also provided. What Multichannel Analog Connections Are Multichannel analog connections consist of a separate audio connection for each channel of audio. Just as there are left- and right-channel analog audio connections for stereo, separate analog audio connections for the center, left and right surround, and, in some cases, left and right surround back channels is possible. All these connections use RCA jacks and cables. Example of Multi-Channel Analog Audio Inputs and Outputs. Images provided by Yamaha Multichannel Preamp Outputs: Home Theater Receivers The most common multichannel analog connection option found on many mid- and high-end home theater receivers and AV preamp/processors, are multichannel analog audio preamp outputs. These outputs connect a home theater receiver or AV preamp/processor to external amplifiers. This enables access to all of the audio features of a home theater receiver — but if onboard amplifiers are not powerful enough for a setup, the preamp outputs allow connection to more powerful external power amplifiers for one or more available channels. When multichannel analog preamp outputs are used, they disable the home theater receiver's internal amplifiers that are designated for the corresponding channels. This means you can't combine the power output of an internal amplifier with an external amplifier for the same channel. Some home theater receivers allow reassignment of internal amplifiers to other channels that are not being bypassed. You may be able to use a mix of internal and external amplifiers to expand the number of channels that a home theater receiver can control. Read the instruction manual for your specific home theater receiver for details on whether it offers the internal amplifier reassignment option. Multichannel Preamp Outputs: AV Processors Multichannel analog preamp outputs are optional on home theater receivers, but they are required on AV preamp processors. That's because AV preamp processors don't have the built-in amplifiers required to power speakers. To get audio signals to speakers, analog preamp outputs enable connection to an external power amplifier(s). The amplifiers, in turn, power the speakers. You can also find multichannel preamp outputs on older DVD/Blu-ray disc players, but these days, that includes just a few high-end models. Multichannel Analog Preamp Outputs: DVD and Blu-ray Disc Players Before the introduction of HDMI, some high-end DVD players and even a few Blu-ray disc players offered a multichannel analog preamp output option; some still do. These connections support two capabilities: The player can decode Dolby Digital and DTS surround-sound audio formats internally. The signal then passes to an older home theater receiver that lacks built-in Dolby Digital/DTS decoding capability and has no digital optical/coaxial or HDMI inputs. It might provide a set of multichannel analog audio inputs, though. When this option is used, the home theater receiver will display either Direct or PCM on the front panel instead of Dolby or DTS. You are still getting the benefits of those formats because they were decoded before they reached the receiver.It can support SACD and DVD-Audio, two audio formats introduced in 1999/2000 that affect audio connectivity, even if the home theater receiver has built-in Dolby/DTS decoding and provides digital optical/coaxial and HDMI inputs. Due to bandwidth requirements, the SACD and DVD-Audio formats can't use digital optical or digital coaxial audio connections. This meant that, before HDMI, the only way to transfer those audio signals to a home theater receiver was via the multichannel analog audio connection option. To use the multichannel analog preamp outputs on a DVD or Blu-ray disc player that has them you need a corresponding set of inputs on a home theater receiver or AV preamp/processor. Multichannel Analog Inputs Before HDMI arrived, multichannel analog audio input connections were very common on home theater receivers and AV preamp/processors, but they are now rare. With a home theater receiver or AV processor that offers this option, you have the flexibility to use a DVD, Blu-ray disc player, or another source component that offers this as an output connection option. Multichannel analog inputs are discrete connections. If you are connecting a two-channel stereo analog source such as a CD player, you need to use only the front left and right channel inputs. For full 5.1 or 7.1 channel surround sound, you need to use all the inputs and connect the corresponding designated channel outputs from your source component to the correctly designated channel inputs. If you connect the analog front left/right preamp outputs of your source device to the surround left/right analog inputs, the sound will come out of the surround speakers instead of the main left/right speakers. If your source component has a subwoofer preamp output, it must be connected to either a receiver's subwoofer preamp input — so it can be routed to the receiver's subwoofer output — or you can bypass that option and connect the subwoofer output from the source device directly to the subwoofer. Know Your Audio Connection Options There are a lot of home theater connection options. Options such as HDMI have been introduced while old options are phasing out. Others have been consolidated, such as shared analog video inputs on newer TVs. Consumers have a mix of old and new components that need to be connected and multichannel analog audio connections are a possible choice that may be available.