Software & Apps Windows 120 120 people found this article helpful ipconfig - Windows Command Line Utility How and When to Use ipconfig in Windows by Bradley Mitchell Writer An MIT graduate who brings years of technical experience to articles on SEO, computers, and wireless networking. our editorial process LinkedIn Bradley Mitchell Updated on March 09, 2020 Windows The Ultimate Laptop Buying Guide Tweet Share Email In Windows, ipconfig is a console application designed to run from the Windows command prompt. This utility allows you to get the IP address information of a Windows computer. It also allows some control over active TCP/IP connections. Ipconfig replaced the older winipcfg utility. Using ipconfig From the command prompt, type ipconfig to run the utility with default options. The output of the default command contains the IP address, network mask, and gateway for all physical and virtual network adapters. The ipconfig command supports several command line options. The command ipconfig /? displays the set of available options. Ipconfig /all This option displays the same IP addressing information for each adapter as the default option. Additionally, it displays DNS and WINS settings for each adapter. Ipconfig /release This option terminates any active TCP/IP connections on all network adapters and releases those IP addresses for use by other applications. Ipconfig/release can be used with specific Windows connection names. In this case, the command affects only the specified connections, not all connections. The command accepts either full connection names or wildcard names. Examples: ipconfig /release "Local Area Connection 1"ipconfig /release *Local* Ipconfig /renew This option re-establishes TCP/IP connections on all network adapters. As with the release option, ipconfig /renew takes an optional connection name specifier. Both /renew and /release options only work on clients configured for dynamic (DHCP) addressing.