Mobile Phones Android How to Share a Wi-Fi Password From iPhone to Android It's a bit more complicated than an Airdrop from iPhone to Android Share Pin Email Print Android Switching from iOS By Dave Johnson Writer Dave Johnson has been writing about tech since 1990. He's the author of over 2 dozen books and his writing has appeared in Wired, PCWorld, Business Insider, and many other publications. our editorial process Twitter LinkedIn Dave Johnson Updated January 24, 2020 Sharing Wi-Fi passwords between devices has made the once onerous task of joining a Wi-Fi network has much easier, since you can avoid painstakingly typing the password into your phone. Two iPhones can effortlessly share a password with a few taps, but if you have an Android phone, it’s not quite so simple to get the password from an iPhone. But once you learn how to share a Wi-Fi password from iPhone to Android, no password typing is required. The (minor) complication is that starting with iOS 11, the iPhone has the ability to share passwords via Airdrop, but Android phones don’t have Airdrop support. The workaround takes just a few moments to set up, and then can be used over and over again for any Android phones that want to join the network. How to Share Wi-Fi Password From iPhone to Android On the iPhone, you start by installing a QR code generator that creates a QR code based on your Wi-Fi network settings. When scanned by the Android phone, the settings can be applied to the phone with a single tap. Here’s how to do it, step by step. Find the network’s Wi-Fi settings. You need to know the SSID, which is the public name of the network, as well as the Wi-Fi password and type of wireless security (such as WPA, WEP, or none). You might be able to find this information in your Wi-Fi router’s mobile app, or it might be on the router. Install a QR code generator on your iPhone that can create codes based on your Wi-Fi settings. There are a number of apps that do this. In the example below, we used Visual Codes, a highly recommended app, since it can save multiple Wi-Fi QR codes to your phone for use again later. The exact steps will vary slightly if you use a different QR code app. Start the Visual Codes app. Tap Add Codes. At the bottom of the screen, tap Connect to WiFi. Type the network’s SSID in the Name field. Type the Wi-Fi password, and tap the correct security type (it’s almost always WPA). Type a memorable name for this Wi-Fi connection in the Label field. Tap Create Code. Your new code will appear on the Codes page, as part of a list along with any other codes your create for other Wi-Fi networks. Tap an entry to display its QR code. On the Android phone, start the camera and position the phone so it can scan the code. When the Wi-Fi network pop-up message appears, tap it to connect automatically to the network.