Software & Apps Windows How to Rebuild the BCD in Windows Rebuild the Boot Configuration Data to fix some Windows startup issues Share Pin Email Print Windows The Ultimate Laptop Buying Guide By Tim Fisher General Manager, VP, Lifewire.com Tim Fisher has 30+ years' professional technology support experience. He writes troubleshooting content and is the General Manager of Lifewire. our editorial process Facebook Twitter LinkedIn Tim Fisher Updated November 09, 2019 If the Windows boot configuration data (BCD) store is missing, becomes corrupted, or isn't properly configured, Windows won't be able to start, and you'll see BOOTMGR is Missing or a similar error message pretty early on in the boot process. The easiest solution to a BCD issue is to simply rebuild it, which you can do automatically with the bootrec command, fully explained below. If you've already scrolled down through this tutorial and it looks like too much, don't worry. Yes, there are several commands to run and lots of output on the screen, but rebuilding the BCD is a very straightforward process. Just follow the instructions exactly and you'll be fine. Lifewire / Chelsea Damraksa These instructions apply to Windows 10, Windows 8, Windows 7, and Windows Vista. Similar problems can exist in Windows XP, but since boot configuration information is stored in the boot.ini file and not the BCD, correcting XP issues with boot data involves a completely different process. How to Rebuild the BCD in Windows 10, 8, 7, or Vista Rebuilding the BCD in Windows should only take around 15 minutes: Start Advanced Startup Options if you're using Windows 10 or Windows 8. Start System Recovery Options if you're using Windows 7 or Windows Vista. In Windows 10/8, select Troubleshoot and then Advanced options. Select the Command Prompt button to start it. Command Prompt won't start immediately. Your computer will show a "Preparing" screen for a short time while it readies the computer. You may need to choose your account name and enter your password to get to the Command Prompt. At the prompt, type the bootrec command as shown below, and then press Enter: bootrec /rebuildbcd The bootrec command will search for Windows installations not included in the BCD and then ask you if you'd like to add one or more to it. You should see one of the following messages at the command line. Option 1 Scanning all disks for Windows installations. Please wait, since this may take a while... Successfully scanned Windows installations. Total identified Windows installations: 0 The operation completed successfully. Option 2 Scanning all disks for Windows installations. Please wait, since this may take a while... Successfully scanned Windows installations. Total identified Windows installations: 1  D:\Windows Add installation to boot list? Yes/No/All: If you see Option 1: Move on to Step 7. This result most likely means that Windows installation data in the BCD store exists but bootrec couldn't find any additional installations of Windows on your computer to add to the BCD. That's fine; you'll just need to take a few extra steps to rebuild the BCD. If you see option 2: Enter Y or Yes to the Add installation to boot list? question, after which you should see The operation completed successfully, followed by a blinking cursor at the prompt. Finish up with Step 10 toward the bottom of the page. Since the BCD store exists and lists a Windows installation, you'll first have to remove it manually and then try to rebuild it again. At the prompt, execute the bcdedit command as shown and then press Enter: bcdedit /export c:\bcdbackup The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a file extension. The command should return the following on screen, meaning the BCD export worked as expected: The operation completed successfully. At this point, you need to adjust several file attributes for the BCD store so you can manipulate it. At the prompt, execute the attrib command exactly like this: attrib c:\boot\bcd -h -r -s What you just did with the attrib command was remove the hidden, read-only, and system attributes from the file bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely (specifically, rename it). To rename the BCD store, execute the ren command as shown: ren c:\boot\bcd bcd.old Now that the BCD store is renamed, you should now be able to successfully rebuild it, as you tried to do in Step 6. You could delete the BCD file entirely since you're about to create a new one. However, renaming the existing BCD accomplishes the same thing since it's now unavailable to Windows, plus provides you with another layer of backup, in addition to the export you did in Step 5, if you decide to undo your actions. Try rebuilding the BCD again by executing the following, followed by Enter: bootrec /rebuildbcd It should produce this in Command Prompt: Scanning all disks for Windows installations. Please wait, since this may take a while... Successfully scanned Windows installations. Total identified Windows installations: 1  D:\Windows Add installation to boot list? Yes/No/All: This means the BCD store rebuild is progressing as expected. At the Add installation to boot list? question, type Y or Yes, followed by the Enter key. You should see this on the screen to show that the BCD rebuild is complete: The operation completed successfully. Restart your computer. Assuming that an issue with the BCD store was the only problem, Windows should start as expected. Depending on how you started Advanced Startup Options or System Recovery Options, you may need to remove a disc or flash drive before restarting. If rebuilding the BCD didn't solve the problem you were having, continue to troubleshoot whatever specific issue you're seeing that's preventing Windows from booting normally.