Streaming Music, Podcasts, & Audio 68 68 people found this article helpful Converting Audio Cassettes to MP3: Digitize Your Audio Tapes Equipment checklist for transferring audio tapes to your computer by Mark Harris Writer Mark Harris is a former writer for Lifewire who wrote about the digital music scene and streaming music services in an easy to understand, no-nonsense manner. our editorial process Mark Harris Updated on February 21, 2020 PS Photography / Getty Images Music, Podcasts, & Audio CDs, MP3s, & Other Media Music For Your Life Audio Streaming Podcasts Radio Tweet Share Email Just like magnetic videotape, the material used in your old audio cassette tapes deteriorates over time — this is commonly known as, Sticky Shed Syndrome (SSS). When this happens, the metal oxide layer (containing your audio recording) gradually falls off from the backing material. This is normally due to moisture ingression which gradually weakens the binder that is used to adhere the magnetic particles. With this in mind, it is therefore very important that you convert any valuable recorded audio to digital that may still be on your old cassettes as soon as possible before the degradation process damages it beyond recovery. Basic Equipment for Transferring Audio Cassettes to Your Computer Even though your music library may be mostly in digital form such as audio CDs, ripped CD tracks, and content downloaded or streamed, you may have some old recordings that are rare and need to be transferred. In order to get this music (or any other type of audio) on to your computer's hard drive or another type of storage solution, you need to digitize the recorded analog sound. This may sound a daunting task and not worth the bother, but it is more straightforward than it sounds. However, before you dive into transferring your tapes to a digital audio format like MP3, it's wise to first read up on all the things you'll need before you start. Audio Cassette Player/Recorder Obviously, to play your old music cassettes you will need a tape-playing device that's in good order. This may be part of a home stereo system, a portable cassette/radio (Boombox/ghettoblaster), or a standalone device like a Sony Walkman. To be able to record the analog sound, the device you are going to use will need to have an audio output connection. This is usually provided via two RCA outputs (red and white phono connectors) or a 1/8" (3.5mm) stereo mini-jack that is often used for headphones. Computer With Soundcard Connections Most computers these days have either a Line In or microphone connection so that you can capture external analog sound and encode it to digital. If your computer's soundcard has a line in jack connection (usually colored blue) then use this. However, if you don't have this facility, you can also use a microphone input connection (colored pink). Good Quality Audio Leads To keep electrical interference to a minimum while transferring your music, it is a good idea to use good quality audio cables so the digitized sound is as clean as possible. You will need to check the type of connections needed to hook up the cassette player to your computer's soundcard before purchasing a cable. Ideally, you should choose cables that are shielded, have gold-plated connections, and use oxygen-free copper (OFC) wiring. Stereo 3.5mm mini-jack (male) to 2 x RCA phono plugs Stereo 3.5mm mini-jack (male) at both ends. Software Many computer operating systems come with a basic built-in software program for recording analog sound via the line-in or microphone inputs. This is fine for quickly capturing audio, but if you want to have the scope to perform audio editing tasks such as removing tape hiss, cleaning up pops/clicks, splitting the captured audio into individual tracks, exporting to different audio formats, etc., then consider using a dedicated audio editing software program. There are quite a few that are free to download such as the very popular open-source Audacity application which is available for a wide range of operating systems.