Software & Apps > Windows 113 113 people found this article helpful Dir Command Examples, switches, options, & more By Tim Fisher Tim Fisher Facebook Twitter VP and General Manager, Lifewire.com Emporia State University Tim Fisher has more than 30 years' of professional technology experience. He's been writing about tech for more than two decades and serves as the VP and General Manager of Lifewire. lifewire's editorial guidelines Updated on January 28, 2021 Reviewed by Jessica Kormos Reviewed by Jessica Kormos Saint Mary-of-the-Woods College Jessica Kormos is a writer and editor with 15 years' experience writing articles, copy, and UX content for Tecca.com, Rosenfeld Media, and many others. lifewire's editorial guidelines Tweet Share Email Windows The Ultimate Laptop Buying Guide In This Article Command Availability Command Syntax Command Examples Extra: Related Commands The dir command is a Command Prompt command used to display a list of the files and subfolders contained in a folder. For each file or folder listed, the command will, by default, show the date and time the item was last changed, if the item is a folder (labeled with DIR) or file, the size of the file if applicable, and finally the name of the file or folder including the file extension. Theresa Chiechi / Lifewire Outside of the file and folder list, the dir command also displays the current drive letter of the partition, the volume label, volume serial number, total number of files listed, total size of those files in bytes, the number of subfolders listed, and the total bytes remaining free on the drive. Dir Command Availability The dir command is available from within the Command Prompt in all Windows operating systems including Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP. Older versions of Windows include the dir command as well but with a few fewer options than we have listed below. The dir command is also a DOS command, available in all versions of MS-DOS. The dir command can be found in offline Command Prompt versions, like the ones available from Advanced Startup Options and System Recovery Options. The dir command is also included in the Recovery Console in Windows XP. The availability of certain dir command switches and other dir command syntax may differ from operating system to operating system. Dir Command Syntax dir [drive:][path][filename] [/a[[:]attributes]] [/b] [/c] [/d] [/l] [/n] [/o[[:]sortorder]] [/p] [/q] [/r] [/s] [/t[[:]timefield]] [/w] [/x] [/4] See How to Read Command Syntax if you're not sure how to interpret the syntax of the dir command as it's written above or shown in the table below. Dir Command Options Item Explanation drive:, path, filename This is the drive, path, and/or filename that you want to see results for. All three are optional since the command can be executed alone. Wildcards are allowed. See the Dir Command Examples section below if this isn't clear. /a When executed alone, this switch shows all types of files and folders, including those with file attributes that typically prevent them from showing up in Command Prompt or in Windows. Use /a with one or more of the following attributes (colon is optional, no spaces needed) to show only those types of files in the command result: a = archive files d = directories h = hidden files i = not content indexed files l = reparse points r = read-only files s = system files v = integrity files x = no scrub files - = Use this as a prefix to any of the above attributes to exclude items with those file attributes from the results. /b Use this option to show the dir results using "bare" format, which removes the typical header and footer information, as well as all the details on each item, leaving only the directory name or file name and extension. /c This switch forces the use of the thousands separator when the command is used in a way that shows file sizes. This is the default behavior on most computers, so the practical use is /-c to disable the thousands separator in results. /d Use /d to limit the items displayed to just folders (contained within brackets) and file names with their extensions. Items are listed top-to-bottom and then across columns. Standard dir command header and footer data remain the same. /l Use this option to show all folder and file names in lowercase. /n This switch produces a result with columns in the date > time > directory > file size > file or folder name column structure. Since this is the default behavior, the practical use is /-n which produces columns in the file or folder name > directory > file size > date > time order. /o Use this option to specify a sort order for the results. When executed alone, /o lists directories first, followed by files, both in alphabetical order. Use this option with one or more of the following values (colon is optional, no spaces needed) to sort the dir command result in the specified manner:d = sort by date/time (oldest first)e = sort by extension (alphabetical)g = group directory first, followed by filesn = sort by name (alphabetical)s = sort by size (smallest first)- = Use this as a prefix with any of the above values to reverse the order (-d to sort by newest first, -s for largest first, etc.). /p This option displays the results one page at a time, interrupted with a Press any key to continue... prompt. Using /p is very similar to using the dir command with the more command. /q Use this switch to display the owner of the file or folder in the results. The easiest way to view or change a file's ownership from within Windows is via the Advanced button in the Security tab when looking at the file's Properties. /r The /r option shows any alternate data streams (ADS) that are part of a file. The data stream itself is listed in a new row, under the file, and is always suffixed with $DATA, making them easy to spot. /s This option shows all the files and folders in the specified directory plus all of the files and folders contained within any subdirectories of that specified directory. /t Use this option with one of the values below (colon is optional, no spaces needed) to specify a time field to be used when sorting and/or displaying results:a = last accessc = createdw = last written /w Use /w to show results in "wide format" which limits the items displayed to just folders (contained within brackets) and file names with their extensions. Items are listed left-to-right and then down rows. Standard dir command header and footer data remain the same. /x This switch shows the "short name" equivalent for files whose long names don't comply with non-8dot3 rules. /4 The /4 switch forces the use of 4-digit years. At least in newer versions of Windows, the 4-digit year display is the default behavior and /-4 doesn't result in a 2-digit year display. /? Use the help switch with the dir command to show details about the above options directly in the Command Prompt window. Executing dir /? is the same as using the help command to execute help dir. Considering the volume of information that the dir command usually returns, saving all of it to a text file via a redirection operator is usually a smart idea. See How to Redirect Command Output to a File for more on how to do this. Dir Command Examples Below are some of the different ways you can use the dir command: Run Without Switches dir In this example, the dir command is used alone, without any drive:, path, filename specifications, nor any switches, producing a result like this: C:\>dirVolume in drive C has no label.Volume Serial Number is F4AC-9851Directory of C:\09/02/2015 12:41 PM $SysReset05/30/2016 06:22 PM 93 HaxLogs.txt05/07/2016 02:58 AM PerfLogs05/22/2016 07:55 PM Program Files05/31/2016 11:30 AM Program Files (x86)07/30/2015 04:32 PM Temp05/22/2016 07:55 PM Users05/22/2016 08:00 PM Windows05/22/2016 09:50 PM Windows.old1 File(s) 93 bytes As you can see, the dir command was executed from the root directory of C (i.e., C:\>). Without specifying where exactly to list the folder and file contents from, the command defaults to displaying this information from where the command was executed. List Hidden Items dir c:\users /ah In the above example, we're requesting that the dir command show results from the drive: and path of c:\users, not from the location we're running the command from. We're also specifying, via the /a switch with the h attribute, that we'd like to only see hidden items, resulting in something like this: C:\>dir c:\users /ahVolume in drive C has no label.Volume Serial Number is F4AC-9851Directory of c:\users05/07/2016 04:04 AM All Users [C:\ProgramData]05/22/2016 08:01 PM Default05/07/2016 04:04 AM Default User [C:\Users\Default]05/07/2016 02:50 AM 174 desktop.ini1 File(s) 174 bytes The small list of directories and the single file you see in the result above doesn't make up the entirety of the c:\users folder—just the hidden files and folders. To see all files and folders, you would execute dir c:\users /a (removing the h) instead. Search for File In Any Folder dir c:\*.csv /s /b > c:\users\tim\desktop\csvfiles.txt In this slightly more complex, but much more practical, example for the dir command, we're requesting that our entire hard drive be searched for CSV files and then the bare minimum results are outputted to a text document. Let's look at this piece by piece: c:\*.csv tells the dir command to look at all files (*) that end in the CSV (.csv) extension in the root of the c: drive. /s instructs it to go deeper than the root of c: and instead, search for files like this in every folder, as deep as the folders go. /b removes anything but the path and file name, essentially creating a readable "list" of these files. > is a redirection operator, meaning "send to" somewhere. c:\users\tim\desktop\csvfiles.txt is the destination for the > redirector, meaning that results will be written to the csvfiles.txt file instead of in Command Prompt, which will be created at the c:\users\tim\desktop location (i.e., the Desktop your see when you're logged in). When you redirect command output to a file, as we did here in this dir command example, Command Prompt doesn't display anything. However, the exact output you would have seen is instead located inside that text file. Here's what our csvfiles.txt looked like after the dir command had completed: c:\ProgramData\Intuit\Quicken\Inet\merchant_alias.csvc:\ProgramData\Intuit\Quicken\Inet\merchant_common.csvc:\Users\All Users\Intuit\Quicken\Inet\merchant_alias.csvc:\Users\All Users\Intuit\Quicken\Inet\merchant_common.csvc:\Users\Tim\AppData\Roaming\condition.2.csvc:\Users\Tim\AppData\Roaming\line.csvc:\Users\Tim\AppData\Roaming\media.csv While you certainly could have skipped the file redirection, and even the "bare format" switch, the results would have been very difficult to work within the Command Prompt window, making it hard to get to what you were after. Related Commands The dir command is often used with the del command. After using dir to find the name and location of the file(s) in any particular folder(s), del can be used to delete files directly from the Command Prompt. Similar is the rmdir /s command, and older deltree command, used to delete folders and files. The rmdir command (without the /s option) is useful for deleting empty folders that you find with the dir command. As mentioned above, the dir command is also often used with a redirection operator. Was this page helpful? Thanks for letting us know! Get the Latest Tech News Delivered Every Day Email Address Sign up There was an error. Please try again. You're in! Thanks for signing up. There was an error. Please try again. Thank you for signing up! Tell us why! Other Not enough details Hard to understand Submit More from Lifewire Net User Command (Examples, Options, Switches, & More) Expand Command Ping Command Diskpart Command How to Get Your Windows 11 Battery Report Xcopy Command How to Redirect Command Output to a File What Is a Redirection Operator? Rename Command What Is a Hidden File? More Command Use SFC /Scannow to Repair Windows System Files Sfc Command (System File Checker) Del Command How to Restore Deleted Files From the Recycle Bin What Is a Root Folder or Root Directory?