How to Kick People off Your Wi-Fi

Unauthorized access can slow network speeds and open major security risks

What to Know

  • Log in to your router dashboard, check for connected devices that aren't yours, and change the network password if you see any.
  • Always use strong passwords, network encryption, disabled WPS, and nonbroadcast SSIDs to prevent unauthorized access.

This article explains how to see who is on your Wi-Fi network, how to lock it down quickly, and take steps to prevent unauthorized access in the future.

How to See Who's on Your Wi-Fi

You can see who is using your Wi-Fi network through your router's interface.

  1. Log in to your router.

  2. Find the DHCP settings, "attached devices" area, or a similarly named section. The specifics vary by router manufacturer.

  3. Look through the list of connected devices and isolate those that aren't yours. If they're not immediately obvious, disconnect and/or turn off those you know belong to you. Any remaining devices are using your network without permission.

Frustrated person unable to freeload on Wi-Fi
Emilie Dunphy / Lifewire

How to Lock Down Your Wi-Fi

If you discover unauthorized devices, change your Wi-Fi password to something much more secure, then encrypt network traffic with WPA or WPA2 encryption. The moment the router requires a new password that unauthorized users don't know, they will be disconnected.

As an added precaution, avoid weak passwords and change the network name (usually abbreviated as SSID), then disable SSID broadcast. Changing the password and SSID and suppressing SSID broadcast make the entire network appear to have gone offline to freeloading users.

More Advanced Router Security

Think of network security as a race to outrun a bear, You don't need to be the fastest; you just need to be faster than the slowest person trying to escape. There's no way to make a home network perfectly impervious to a dedicated hacker who has the tools and skills to break into your network. But if you layer enough security practices, the hacker will pluck the low-hanging fruit first, reducing your relative risk of intrusion.

Disable File and Printer Sharing in Windows. If a hacker gains access to your network and all your files and devices are easily discovered from within your home network, your risk of a data breach increases substantially. A "defense-in-depth" approach means you employ several different levels of security access instead of relying on just one strategy.

Start by implementing MAC address filtering on your router so that only the MAC addresses you specify (the ones that belong to your devices) are allowed to connect. This approach isn't foolproof—it's easy to spoof a MAC address—but this level of filtering adds one extra step to hack through and dissuades low-skill, opportunistic Wi-Fi leeches.

Similarly, limit DHCP addresses to the exact number of devices you regularly use so that no new devices are allowed an IP address even if they manage to get past your Wi-Fi password.

Most importantly: disable Wi-Fi Protected Setup. WPS allows one-touch pairing of a device to your router, but it's notoriously insecure. WPS-enabled routers usually get hacked within a matter of minutes by following online tutorials that rely on easily available freeware.

Remain Vigilant

If you live in a rural area, you're likely fine with just baseline precautions. To infiltrate your Wi-Fi network, a hacker must remain within Wi-Fi range, about 300 feet or so from the router. If your house is 500 feet from the road and your nearest neighbor is a quarter-mile away, an attacker would need to be on your property to hack your Wi-Fi.

But if you live in a dense urban area or in proximity to others (e.g., in a dorm), the risk increases. Advanced technology to brute-force attack Wi-Fi routers has long been available as freely downloadable, open-source tools. Software like Reaver will slice through even strong defenses without much difficulty, so you must periodically check your router's DCHP allocation tables to verify inappropriate access.

Set a task on your calendar to-do list to periodically check your router's control panel. Look for unauthorized devices. If you use strong security practices but your network is intruded upon repeatedly, reach out to your internet service provider for assistance. Persistent, successful intrusion against a well-protected home network is a sign of trouble that's worth referring to your ISP.

  • How do I forget a Wi-Fi network on a Mac?

    To forget a network on Mac, click the Wi-Fi icon from the bar at the top of the screen. Select Open Network Preferences, click Wi-Fi > Advanced, and find the network you want to delete. Select the network and click the minus sign (-) to forget it.

  • What is a network security key for Wi-FI?

    A network security key is a code or passphrase you use to connect your device to a private Wi-Fi network. To find it, log into your home router as an administrator and view it on the main page.

  • How do I forget a Wi-Fi network on Windows 10?

    To forget a network on Windows 10, go to the Start Menu and open Settings. Select Network & Internet > Wi-Fi > Manage Known Networks. Select the network you want to remove > Forget.

Was this page helpful?