Internet, Networking, & Security Home Networking What Is a Crossover Cable? When you need to connect two network devices of the same type Share Pin Email Print Tom Grill/Photographer's Choice RF / Getty Images Home Networking The Wireless Connection Routers & Firewalls Network Hubs ISP Broadband Ethernet Installing & Upgrading Wi-Fi & Wireless By Bradley Mitchell Writer An MIT graduate who brings years of technical experience to articles on SEO, computers, and wireless networking. our editorial process LinkedIn Bradley Mitchell Updated November 29, 2019 101 101 people found this article helpful An Ethernet crossover cable, also known as a crossed cable, connects two Ethernet network devices to each other. These cables were created to support temporary host-to-host networking in situations where an intermediate device, such as a network router, is not present. Crossover cables look almost identical to ordinary, straight-through (or patch) Ethernet cables, but the internal wiring structures are different. What Is a Crossover Cable? An ordinary patch cable connects different types of devices, for example, a computer and a network switch. A crossover cable connects two devices of the same type. The ends of a patch cable can be wired in any way as long as both ends are identical. Compared to straight-through Ethernet cables, the internal wiring of a crossover cable reverses the transmit and receive signals. The reversed color-coded wires can be seen through the RJ-45 connectors at each end of the cable: Standard cables have an identical sequence of colored wires on each end.Crossover cables have the first and third wires (counting from left to right) crossed, as well as the second and sixth. A good Ethernet crossover cable bears special markings that distinguish it from straight-through cables. Many are red and have "crossover" stamped on the packaging and wire casing. Do You Need a Crossover Cable? Information technology (IT) professionals used crossover cables often in the 1990s and 2000s; the popular forms of Ethernet at that time did not support direct cable connections between hosts. Both the original and Fast Ethernet standards were designed to use specific wires for both the transmit and receive signals. These standards required the two endpoints to communicate through an intermediate device to avoid conflicts caused by using the same wires for both transmit and receive. A feature of Ethernet called MDI-X provides the necessary auto-detection support to prevent these signal conflicts. It allows the Ethernet interface to automatically determine which signaling convention the device on the other end of the cable uses, and negotiates the use of the transmit and receive wires accordingly. Only one end of a connection needs to support auto-detection for this feature to work. Most home broadband routers (even older models) incorporated MDI-X support on their Ethernet interfaces. Gigabit Ethernet also adopted MDI-X as a standard. Crossover cables are needed only when connecting two Ethernet client devices, neither of which is configured for Gigabit Ethernet. Modern Ethernet devices automatically detect the use of crossover cables and work with them seamlessly. How to Use Ethernet Crossover Cables Crossover cables should only be used for direct network connections. Attempting to connect a computer to an old router or network switch with a crossover cable instead of a normal cable can prevent the link from functioning. These cables can be purchased through various electronics outlets. Hobbyists and IT professionals often prefer to make their own crossover cables instead. To convert a straight-through cable to a crossover cable, remove the connector and reattach the wires with the appropriate transmit and receive wires crossed.