Home Theater & Entertainment TV & Displays Q&A: Connecting Digital Cable to TV Through RF Modulator 5 Simple Steps by Matthew Torres Writer Former Lifewire writer Matthew Torres is a journalist who writes about television technology, consumer support articles, and TV-related news. our editorial process Matthew Torres Updated on February 18, 2019 Audio/Video Inputs. Jeffrey Coolidge / Getty Images TV & Displays HDMI & Connections Samsung Projectors Antennas Remote Controls Tweet Share Email Question: "I need help hooking up my TV to digital cable, DVD and VCR. I have a RF modulator, but no instructions. My TV is an older set with one cable hook up - the modulator has room for 4 hookups. Please, any help would be greatly appreciated." Answer: This is a problem a lot of people have - with or without a RF modulator. In this case, we'll attack the problem with the RF modulator in mind. After you connect everything you'll notice working with a RF modulator is just like working without one, except those with a RF modulator will have one device between their video signal and television. As for the instructions, I am going to assume the DVD player is not a combo unit with the VCR, and that you want to record TV on your VCR. Step 4 will include connecting your DVD player, but if the DVD player is a combo unit with the VCR, just ignore Step 4 as DVD connection will be included in the VCR set up. Step 1: Connect the coaxial cable coming out from the wall to your digital cable box in the ‘video in’ slot. It might also be labeled ‘antenna in’ or ‘cable in’. Step 2: From the cable box, connect a coaxial or composite (yellow video cable) and stereo (red-white) RCA audio cables to the VIDEO IN terminal on your VCR. Step 3: From the VCR, you will have to connect this to the RF Modulator using a coaxial cable from the VIDEO OUT on the VCR to one of the IN ports on your RF modulator. Step 4: You can now connect your DVD player to the RF Modulator by using the yellow-red-white composite/RCA cables from the VIDEO OUT on the DVD player to another port on the RF modulator. Step 5: From the RF modulator, connect this unit to your TV by using a coaxial cable. It will be from the VIDEO OUT on the RF modulator to the VIDEO IN or CABLE or ANTENNA IN port on your television. This should be all you need to get started watching your digital television. In simple terms here is what you did: Coaxial from wall to cable boxCable box to VCRVCR to RF modulatorDVD player to RF ModulatorRF modulator to TV You will only be able to record what is on channel three because the digital cable will require you be on channel three. As for future connections to the RF modulator - just plug your viewing device into it and hit the button activating the video signal for the device you want to view. As long as it is connected to the television and the TV is on channel three, you should be able to see your video signal. Have a question? Send me an email at email@example.com.