How to Charge Meta (Oculus) Quest/Quest 2 Controllers

Keep your VR controllers charged up and ready to play

What to Know

  • The Quest and Quest 2 use one AA battery per controller.
  • To avoid downtime, buy two pairs of rechargeable AA batteries and leave one on the charger.
  • Anker's charging station allows you to keep the controllers charged without removing the batteries.

This article explains how to charge Meta (Oculus) Quest and Quest 2 controllers, including how to use the optional charging station.

How to Charge Meta (Oculus) Quest and Quest 2 Controllers

The controllers that come with the Quest and Quest 2 have a small eject icon molded into the plastic of each grip, roughly opposite the trigger button. That’s the battery compartment cover, and there’s a single AA battery hidden inside. The batteries that come with these controllers are alkaline, and you can’t recharge them.

To charge Meta (Oculus) Quest and Quest 2 controllers, you need to replace the included alkaline batteries with rechargeable batteries. You then need to charge those batteries when they run out of power, using a compatible battery charger. For the sake of convenience, you may want to buy four batteries instead of two and leave two of them on the charger, so they’re always ready.

Here’s how to charge your Quest controllers:

  1. Hold an Oculus controller in either one or both hands, with the small eject symbol facing up and away from you.

    An Oculus Quest controller showing how to remove the cover.
    Jeremy Laukkonen
  2. Gently push away from yourself with your thumb or thumbs to unlock the battery compartment cover.

    Removing the battery compartment cover from an Oculus Quest 2 controller.
     Jeremy Laukkonen
  3. Remove the battery cover.

    An Oculus Quest controller with the battery cover removed.
     Jeremy Laukkonen
  4. Remove the AA battery.

    An Oculus Quest 2 controller with the battery removed.
    Jeremy Laukkonen
  5. Replace the battery with a rechargeable AA.

    A rechargeable battery installed in an Oculus Quest 2 controller.
     Jeremy Laukkonen
  6. Replace the battery cover, and then repeat steps 1-5 with the other controller.

    An Oculus Quest 2 controller with the battery replaced.
     Jeremy Laukkonen
  7. When the batteries in your controllers die, swap them for fully charged ones.

How to Charge Meta (Oculus) Quest Controllers Using the Charging Dock

Quest controllers aren’t rechargeable from the factory, but the officially licensed Anker Charging Dock makes charging your headset and controllers nearly effortless.

Here’s how to charge your Meta (Oculus) Quest controllers using the charging dock:

  1. Remove the battery covers from your controllers.

    Oculus Quest 2 controllers with the covers removed.
     Jeremy Laukkonen
  2. Remove the batteries from your controllers.

    Oculus Quest 2 controllers with the batteries removed.
     Jeremy Laukkonen
  3. Install the rechargeable batteries that came with the dock.

    Oculus Quest 2 controllers with Anker rechargeable batteries installed.
     Jeremy Laukkonen

    The dock comes with special rechargeable batteries that have charge contacts on the sides. Make sure to orient the charge contacts, so they are pointing out.

  4. Install the battery covers that came with the dock.

    Oculus Quest 2 controllers with Anker battery covers installed.
     Jeremy Laukkonen

    These covers are identical to the factory covers, but they have electrical contacts to facilitate charging.

  5. Whenever you aren't using your Quest, place the controllers in the charging cradles.

    Placing an Oculus Quest controller in the Anker dock.
    Jeremy Laukkonen 
  6. Make sure each controller is seated properly so charging can take place.

    An Oculus Quest controller set in an Anker charging dock.
  7. Place the headset in the cradle as well to charge everything at once.

    Oculus Quest 2 controllers and headset charging in the Anker dock.
     Jeremy Laukkonen
Was this page helpful?