How to Change a Fitbit Versa Band

Give your smartwatch a style refresh

Are you ready to give your Fitbit Versa a style refresh? Tons of stylish accessory wristbands are available to instantly update the look of your activity tracker, including colorful silicone, leather, and stainless-steel mesh. Or maybe your old band broke and you need to know how to replace it. Keep reading to learn how to change the Fitbit Versa band.

How to Change the Band on a Fitbit Versa, Special Edition, or Lite Edition

Here's how to change the band on a Fitbit Versa series activity tracker, which includes the Versa, Versa 1/2, Versa Lite, and Versa SE.

Fitbit Versa
  1. Look at the inside of your Fitbit Versa band and locate the two quick-release pins connected to either side of the Fitbit watch case.

  2. Holding the Fitbit watch case in one hand, press the release pin (shown in blue) with the tip of your finger and pull the band away from the watch case. It should release easily. Repeat this process for the other side of the band.

    Never force anything when changing a Fitbit band, as unintentional damage could void your warranty. If you're having issues changing your band, contact Fitbit help.

    Fitbit Versa pins
  3. When you're ready to attach the new wristband, check the position of the watch case to your wrist and make sure you're attaching the band with the correct orientation.

  4. Hold the watch case so the inside is facing you. Now, hold the band at a right angle and place the band's pin (on the side opposite the quick-release lever) into the bottom notch on the watch case.

    Attaching new Fitbit Versa band
  5. Press down on the quick release pin to insert the band completely and attach it to the top of the watch case clip until it snaps into place. Repeat this process for the other side of the band.

    Pressing the top part of Fitbit Versa pin
Was this page helpful?