How to Change a Fitbit Versa Band

Give your smartwatch a style refresh

What to Know

  • Hold the Fitbit in one hand, underside up. Press one release pin with your finger and pull the band away. Repeat for the other side.
  • Hold the new band at a right angle to the watch and position the band pin into the notch opposite the release pin.
  • Press the release pin in and insert the band until the pin snaps in place. Repeat for the other side.

This article explains how to remove the band of a Fitbit Versa and replace it with a different band. The information applies to the Fitbit Versa series, including the Versa, Versa 1/2, Versa Lite, and Versa SE.

How to Change a Fitbit Versa Band

Are you ready to give your Fitbit Versa a style refresh? Tons of stylish accessory wristbands are available to instantly update the look of your activity tracker, including colorful silicone, leather, and stainless-steel mesh. Or maybe your old band broke and you need to know how to replace it. Keep reading to learn how to change the Fitbit Versa band.

  1. Look at the inside of your Fitbit Versa band and locate the two quick-release pins connected to either side of the Fitbit watch case.

  2. Holding the Fitbit watch case in one hand, press the release pin (shown in blue) with the tip of your finger and pull the band away from the watch case. It should release easily. Repeat this process for the other side of the band.

    Never force anything when changing a Fitbit band, as unintentional damage could void your warranty. If you're having issues changing your band, contact Fitbit help.

    Fitbit Versa pins
  3. When you're ready to attach the new wristband, check the position of the watch case to your wrist and make sure you're attaching the band with the correct orientation.

  4. Hold the watch case so the inside is facing you. Now, hold the band at a right angle and place the band's pin (on the side opposite the quick-release lever) into the bottom notch on the watch case.

    Attaching new Fitbit Versa band
  5. Press down on the quick release pin to insert the band completely and attach it to the top of the watch case clip until it snaps into place. Repeat this process for the other side of the band.

    Pressing the top part of Fitbit Versa pin
Was this page helpful?