AudioXperts 4TV 2112 Audio Entertainment Console - Photos

01
of 05

AudioXperts 4TV 2112 Audio Entertainment Console - Photo Profile

AudioXperts 4TV 2112 Audio Entertainment Console - Front and Rear View
AudioXperts 4TV 2112 Virtual Surround Sound Console Audio Entertainment Console. Photo of front and rear view. Photo © Robert Silva - Licensed to About.com

To start this photo look at AudioXperts 4TV 2112 Audio Entertainment Console, is both a front and rear view of the system.

 

AudioXperts 4TV 2112 provides functions similar from what you would expect from a sound bar, but encased in a low profile cabinet featuring an aluminum casing with a smoked glass top surface, which can serve as a platform to place a TV. A detachable swivel base is also provided, if needed, but is not shown in this photo profile.

Starting on top is a front view of the 4TV 2112 features the front grill, the remote control sensor, and the Bluetooth Antenna.

The bottom photo shows a rear view of the 4TV 2112 , which reveals the available connection options.

However, for a closer look at the controls and connections of the 4TV 2112, proceed through the next series of photos...

02
of 05

AudioXperts 4TV 2112 Audio Entertainment Console - Controls

AudioXperts 4TV 2112 Audio Entertainment Console - Controls
AudioXperts 4TV 2112 Virtual Surround Sound Console Audio Entertainment Console. Photo of onboard controls. Photo © Robert Silva - Licensed to About.com

Here is a close-up photo of the top panel controls, which are just above the center of the unit. The controls are touch sensitive.

 

Starting on left side of the top row are the DTS and Dolby LED Status indicators, followed by all of the 4TV 2112's input options which includes Digital (toggles between Optical or Coaxial options), Analog (RCA connections), Wifi (For Airport Express), Bluetooth, USB, and Aux (via analog 3.5 mm connection input).

Starting on the left of the bottom row is the Power/Standby button (the Master Power Button on the rear panel of the system needs to be in the On position for the Power/Standby function to work), EQ Selector (Music, Dialog, Music), Remote Learning (the 4TV 2112 does not come with a remote control, remote commands must be programmed into a compatible Universal or Multi-brand remote), Mute, and Volume Control.

Proceed to the next photo...

03
of 05

AudioXperts 4TV 2112 Audio Entertainment Console - Audio Connections

AudioXperts 4TV 2112 Audio Entertainment Console - Rear Connections - Audio Connections
AudioXperts 4TV 2112 Virtual Surround Sound Console Audio Entertainment Console. Photo of rear panel audio connections. Photo © Robert Silva - Licensed to About.com

Shown in this photo are the rear panel connections and controls located on to the left of the 4TV 2112's Bluetooth antenna.

 

From left to right, first is the Subwoofer Volume control. This control allows you to set the degrees of bass output in relation to the volume output of the rest of the system. Then using the main volume control, you can raise or lower all of the speakers' volume level as a group, maintaining the the ratio of bass, mid, and high-frequencies you desire.

Moving to the right of Subwoofer level control is a USB input for accessing music content stored on flash drives, or other compatible USB devices, followed by a mini-USB connector for installing firmware updates, as determined by the manufacturer.

Next are three digital audio connections. The red connection on located near the top is a Digital Coaxial audio input, and below are two Digital Optical Audio Inputs (one is labeled Digital, the other labeled Airport). The connection labeled Airport is where you can connect the digital optical output of an Apple Airport Express. However, if you are not using an Airport Express, but have an additional source device that uses digital optical connections, you can use the "Airport" labeled input for that purpose as well.

Next, there is a small switch labeled "Trim". This switch allows users to adjust the audio level of the incoming input signal from source devices.

Moving to the right of this are a set of analog stereo audio inputs as well as a ZONE Output. The Zone output feature allows you to send the audio signals coming from source devices connected to the 4TV 2112 to an amplifier or home theater receiver in another room. However, it is important to point out that the Zone output only sends the same signal that is being played on the 4TV 2112. You cannot listen to one source on the 4TV 2112, and a different source in a second Zone using this option.

Proceed to the next photo....

04
of 05

AudioXperts 4TV 2112 Audio Entertainment Console - Power Connections

AudioXperts 4TV 2112 Audio Entertainment Console - Rear Connections - Power
AudioXperts 4TV 2112 Virtual Surround Sound Console Audio Entertainment Console. Photo of rear panel connections power. Photo © Robert Silva - Licensed to About.com

On this page is a close-up loo at the power receptacle provided for the connection of an Apple Airport Express, as well as the power receptacle and Master Power Switch for the entire system.

Proceed to the next photo...

05
of 05

AudioXperts 4TV 2112 Audio Entertainment Console - With TV On Top

AudioXperts 4TV 2112 Audio Entertainment Console - With TV On Top
AudioXperts 4TV 2112 Virtual Surround Sound Console Audio Entertainment Console. Photo of Front View with TV on Top. Photo © Robert Silva - Licensed to About.com

Here is a final photo look at the AudioXperts 4TV 2112, which shows how it can be used as a platform to set your TV on. The TV shown in the photo is a 42-inch Vizio E420i (on review loan). The 4TV 2112 can be used with both smaller and larger TVs, weighing up to 125 lbs (with the 2112's swivel based attached) and up to 175 lbs without.

For additional explanation and perspective of the features and performance of the AudioXperts 4TV 2112, read my Review.

NOTE: As of 2015 this product has been discontinued and AudioXperts is no longer in business.

Was this page helpful?